Model

Shimadzu 2450 UV-VIS Spectrophotometer

Features

• High level of ultra-low stray light
  
  The UV-2450 uses a single monochromator, and stray astigmatism is below 0.015%. Low stray light can be directly determined without diluting the sample at high concentrations.
   
• The general-purpose software Uvprobe UV-2450
  
  Through a new generation of bilingual Chinese and English operating software Uvprobe control, including spectral determination, photometric determination, kinetic measurement and report processing four modules, from the basic measurement to the analysis of the study can be achieved through it. Uvprobe realizes the true QA/QC function, fully supports GLP, GMP. In addition, the film thickness measurement, color analysis and other software can be loaded.
   
• Rich choice of accessories and wide range of application fields
  
  Life sciences: You can test the micro-samples from your life sciences research.. Integral ball Test: can be used to test the turbid sample and the powder-like sample.
  Reflective accessory: The measurement of the relative reflection and reflection of the optical material is possible.

Specifications

Light Source - 50W halogen lamp (2,000 hours life), deuterium lamp (socket type), light source auto position adjustment built in
Wavelength Range - 190 to 1100 nm (Setting wavelength range)
Power Requirements - AC100, 120, 220, 240 V, switch selectable 50/60Hz
Wavelength accuracy: ±0.3nm with auto wavelength correction included 
Wavelength slew rate: about 3200nm/min
Wavelength scan rate: about 900 ~ 160nm/min  
Resolution: 0.1nm 
Photometric modes: Absorbance (Abs.), transmittance (%), reflectance (%), energy (E) 
Baseline correction: Auto correction using PC (Stored baseline is automatically loaded when power is switched on, re-correction is possible)